ES-600W DC12V to AC110V pure sine wave power - built-in charger and uninterruptible power supply system

ES-600W DC12V to AC110V pure sine wave power - built-in charger and uninterruptible power supply system

Key Features

 

Product name: CSP ES-600W DC12V to AC 110V pure sine wave power 

 

Product description: CSP ES-600W Pure Sine Wave Power Inverter is designed to provide continuous power supply from DC power to AC power, this inverter is solution for powering sensitive electronics and appliances in regular, emergency situations, and more.

 

With its pure sine wave output, it is trustworthy that devices are receiving stable and distortion-free power, ensuring optimal performance and protection against potential damage. Whether powering laptops, TVs, lights, or small appliances under 600W, this inverter delivers consistent power.

 

Compact, lightweight, and portable CSP ES-600W Pure Sine Wave Power Inverter is built for convenience. Take it on road trips, camping adventures, or install it in a vehicle, or cabin for reliable power on the go. Its high efficiency design maximizes battery runtime, while multiple built-in protections ensure safe operation under various conditions.

 

Say goodbye to noisy generators and unreliable power sources. With our 600W Pure Sine Wave Power Inverter, you'll enjoy quiet and dependable power wherever you need it. Experience the difference today and take control of your power needs with confidence.

 

System Specification 

  • Input Voltage: 12V
  • Output Voltage: 110V, 60Hz±1 Hz 
  • Output frequency and wave type: 110VAC/60Hz±1 Hz (SINE WAVE)
  • Continuous power output: 600W (Max.)
  • Maximum instant current: 600w 1/60 sec
  • Built-in Fuse: 35A x2
  • Supported battery types: Lead-acid battery/4- lithium-iron battery
  • Output Number of AC outlets: Port *2
  • Output Numbers of DC sockets: USB QC 3.0 x1 & TYPE-C+PD x1
  • Cooling: Intelligent fan
  • Weight: 1.6kg
  • Output wave: Modified sine wave
  • Dimensions: 205 x 150 x 75mm

 

PROTECTION

This power Inverter has a strong protection circuit, including overload, high temperature, low voltage, reverse polarity, etc., when the protection circuit is started, it will automatically power off, please eliminate the abnormality and then start again. Disconnect the power for a few seconds and After troubleshooting, reconnect and power on to test the inverter. The warning method is a beep and a green LED to sound and flash synchronously, and the warning method is as follows:

  • Low voltage power outage: -----●-● (1 long 2 short beep)
  • Overload power outage: ●●●●●● (Continuous beep)
  • overheat power outage: ●----------------- (1 long beep)
  • short circuit: ●-●-● (3 beep)
  • High voltage: ●------●-●-● (1 long and three short beeps)

 

Features

  • Bio-directional charger, AC to DC, DC to AC
  • Microcontroller Integrated 
  • LED display indicators for power source
  • Input & Output Fully Isolation 
  • Intelligent Temp & Load Cooling Fan 
  • Multi Pre-Alarm & Shutdown Alarm Protections: Battery Type Detection / Polarity Reverse / Low Voltage/Short Circuit / Overheat / Overload /High Voltage
  • Aluminum Housing    
  • 100% Made in Taiwan

 

 

【Precautions】

 

  • When using the car cigarette light cable, do not connect electrical appliances with a total power consumption of more than 120W. 
  • When using, please strictly follow the rules of use to avoid the danger of electric shock. 
  • Do not use electrical appliances that consume more than the power consumption of the product. 
  • When in use, the fan will automatically start when the temperature is overheated, please pay attention to ventilation to avoid excessive body temperature. 
  • Please do not disassemble the main body to avoid the risk of electric shock. 
  • Do not wet or soak the power converter in water.
  • After use, be sure to unplug the power cable and store it properly. 
  • During use, each plug must be inserted into the positioning system to avoid heating and sparking caused by poor contact.
  • During use, if you find smoke or other abnormalities, please stop using it immediately and send it for repair. 
  • When not in use, all power must be turned off, and the battery power cable must be removed

 

【Product Contents】

  • 600W Power Converter: 1 unit 
  • Fixing screws: 4 pcs. 
  • 35A Fuse: 2 pcs 
  • Product Description: 1 sheet 
  • The following are additional products:

Rubber connector protector: 2 (1 each in red/black)

  • Connection cable: 2 (red/black) 

 

Related products: PD-600, ES-1200, DC121000A 1000W